Dangers of Coasting Equipment

  • Safety Toolbox Talk Webmaster
  • Safety Toolbox Talk Webmaster's Avatar Topic Author
  • Offline
  • Administrator
  • Administrator
More
#537 by Safety Toolbox Talk Webmaster
Dangers of Coasting Equipment was created by Safety Toolbox Talk Webmaster
Just because you hit the stop button on a piece...

Just because you hit the stop button on a piece of equipment, doesn’t necessarily stop all the parts. Here is an example courtesy of the British Columbia Worker’s Compensation Board:

A hewsaw operator had his right forearm medically amputated after suffering severe cuts and fractures. A jammed log had stalled the drive motor and automatically shut off power to the saw. Unfortunately, the braking system of this saw does not work during power outages or when the drive motor stalls. The operator removed a portion of the guarding system where he could see only the one cutting head that had stopped because of the jammed log. There was no sensor to indicate if all cutting heads had come to a complete stop. When the worker reached in to remove the jammed log, his right hand was caught in one of the cutting heads that was still rotating and coasting to a stop.

High speed rotating parts and motors don’t stop just because the machine is stopped. Many tools and equipment parts continue to coast when power is cut.

Today, look at where you work. Are there high speed rotating parts? Think twice before reaching anywhere near them and ensure that all parts are truly not moving.

Please Log in or Create an account to join the conversation.

More
#538 by V.G.Narasimhan
Replied by V.G.Narasimhan on topic Dangers of Coasting Equipment
It's real danger of equipment while coasting down

Please Log in or Create an account to join the conversation.

Moderators: Super UserSafety Toolbox Talk Webmaster