Forklift Safety Rules

3.530303030303 1 1 1 1 1 1 1 1 1 1 Rating 3.53 (66 Votes)

Forklifts are excellent labor saving devices. They save time and reduce the likelihood of injury associated with manual material handling activities. However, forklifts can become very dangerous if operated by a reckless or untrained operator. All operators should receive safety training prior to being allowed to operate a forklift.

Forklift accidents tend to be very serious, involving both personal injury and damage to property. These accidents can be avoided if operators use some common sense and follow safe operating procedures. Do not operate a forklift until you have been properly trained and authorized to do so.

Basic Forklift Safety Practices

Here are a few common safety rules to follow during forklift operation:

  1. Use the seat belt. It will keep you secured in the seat in the unplanned event of a tip over.
  2. A parked forklift should have the forks flat on the floor with the controls set to neutral and with the parking brake set.
  3. A forklift is considered to be "unattended" if the operator is more than 25 feet away or if the forklift is out of the direct vision of the operator. Unattended forklifts should be parked with the power turned off.
  4. When operating the forklift on inclines, the load should always be on the uphill side of the incline. Drive forward going up the incline. Drive backward going down the incline.
  5. When traveling without a load on the forks, keep the forks approximately four to six inches off the floor.
  6. Never allow anyone to walk underneath a raised load.
  7. Stop at all blind corners to check for other traffic in the area. This includes other forklifts and pedestrians. Honk your horn and look before you proceed.
  8. If carrying a tall load that blocks your forward vision, drive in reverse and turn your head so you can see where you are going.
  9. If operating around other forklifts maintain a three-forklift length distance between forklifts and never attempt passing.
  10. Never drive a forklift up to the back of a person who is unaware that the forklift is behind them.

FORKLIFT SAFETY IS FOR EVERYONE'S BENEFIT


This toolbox topic was reviewed by ______________________________________ on ___________________________ with the following employees:

mike's Avatar
mike replied the topic: #407
These safety points can definitely help decrease accident if followed. All operators must adhere to safety rules in place at the workplace. I also agree that operators must be licensed before any work commencement.

All individual must be certified driving the forklift. If not, you need to go to a forklift training school, enroll for a course and complete the training program. It only take 2 days to get forklift certified. You will need to undergo classroom training, take the written test after it. On the second day, you need to perform actual or practical operation of the forklift, you instructor will give set of instruction you need to accomplish. If you got everything right, the instructor will issue certification and small license card. These are proof that you've gone through such training in order for you to get accepted for a job. Good luck!

I found this website you can follow their step by step instruction to apply for forklift license: forkliftlicenseguide.com
Just click your state or territory, they even provided list of schools where to take forklift training near you. The website is excellent for novice in this field, as they provide instruction and list of schools where to take the forklift training.